|
1. |
Post Date: 6.Sep.2013
Analog Design Engineer (Ref: Design/ANDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
Perform analog and mixed-signal system/ circuit design, design entry, circuit simulation and system level simulation.
-
Perform and supervise physical design and design verification.
-
Develop test module for silicon evaluation
-
Perform device/ circuit characterization and silicon/ product evaluation
-
Contribute to intellectual property and product/ process development
-
Perform documentation and design reviews
Job Requirements:
-
B.Sc or above in Electronic Engineering or Computer Engineering or equivalent. Applicants with postgraduate degree or above would be considered as an advantage
-
At least 3 years of IC design experiences and familiarities/ knowledge in some areas of display drivers, audio/video circuits, current and voltage references, amplifiers, oscillators, temperature compensation, low power, high speed/ multi-voltage design, data converters, power management, high speed serial interface, bandgap, ADC and analog verification
-
Candidate with more experiences will be considered as Senior Analog Design Engineer
|
|
2. |
Post Date: 6.Sep.2013
Digital Design Engineer (Ref: Design/DDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
Perform RTL coding and simulation, logic synthesis, timing analysis, schematic entry, mixed-signals integration, circuit simulation and system level simulation
-
Perform and supervise physical design and design verification
-
Develop test module for silicon evaluation
-
Perform silicon/ product evaluation
-
Contribute to intellectual property and product/ process development
-
Perform documentation and design reviews
Job Requirements:
-
Postgraduate degree or above in Electronic Engineering or Computer Engineering or equivalent
-
At least 2 years of IC design experience in digital design
-
Familiarities/ knowledge in display driver IC development or low power design development would be considered as an advantage
|
|
3. |
Post Date: 15.Oct.2013
Design Engineer - ESD (Ref: Design/DEESD/CO/HK)
Location: Hong Kong
Job responsibilities:
-
Product on-chip ESD design, test chip IP design and physical layout supervision
-
ESD and TLP testing, product debug, failure and correlation analysis
-
Document ESD test plan, design guideline and characterization report
-
Set up ESD IP library and technology benchmark
Job requirements:
-
M.Ph/ M.Sc/ B.Sc in Electronic Engineering or Computer Engineering or equivalent
-
2-3 years relevant working experience in ESD On-Chip design for SoC, mixed-signal, HV, or Power and RF technology
-
Experience in CMOS structures, high voltage and power device structures, wafer technology and microelectronic fabrication is an advantage
|
|
4. |
Post Date: 22.Nov.2013
Senior Digital Design Engineer (Ref: Design/SDDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
Perform logic design, RTL coding, design verification, logic synthesis, DFT and static timing analysis
-
Develop verification environment and coverage closure
-
Support wafer level testing and silicon evaluation
-
Prepare technical documents
Job Requirements:
-
B.Sc or above in Electronic Engineering or equivalent. Applicants with postgraduate degree would be considered as an advantage
-
5 years or above of solid experience in one or more of the following areas: Verilog-based logic design and synthesis, constrained random testbench with System Verilog & UVM, assertion based design verification or circuit-level SPICE simulations
-
Knowledge of SoC and embedded system
-
Knowledge of scripting languages such as Perl, TCL and Make
-
Candidate with less experience will be considered as Digital Design Engineer
|
|
5. |
Post Date: 9.Dec.2013
Physical Design Engineer (Ref: Design/PDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
Perform full and semi-custom IC layout construction using various IC layout and verification tools
-
Write necessary programs or scripts to enhance work efficiency
-
Write verification rule files according to wafer foundry requirements
Job Requirements:
-
Higher Diploma or Bachelor Degree in Semiconductor and Electronics Engineering areas
-
2 years or above experiences in layout design and candidate with more solid experiences will be considered for a senior position
-
Knowledge in CMOS IC physical layout design and able to use various EDA tools
-
Good understanding of semiconductor theory and structures of devices
-
Good English and communication skills
-
Self motivated and good working attitude
|
|
6. |
Post Date: 30.Dec.2013
Algorithm Development Engineer (Ref: BO/ADE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
To invent and develop small footprint firmware algorithm for touch products
-
To conduct simulation, verification and evaluation on firmware algorithms
-
To develop demostration in embedded systems
-
To prepare and generate algorithm reports
-
To debug and investigate during product development cycle
Job Requirements:
-
Ph.D/ M.Ph/ M.Sc/ B.Sc in Electronics Engineering or Computer Science equivalent
-
At least 2 years of experience in algorithm research and development
-
Familiar with C / C++, Assembly, MATLAB or equivalent, Visual Studio, Linux and Windows OS structure, I2C, SPI, HID, USB, DAC and ADC
-
Experiences and knowledge in touch technology development is a plus
-
Candidates with substantial working experiences, including university research experiences, will be considered as Senior Engineer
|
|
7. |
Post Date: 30.Dec.2013
Sensor Design Engineer (Ref: BO/SDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
To investigate capacitive touch sensor design
-
To invent and design sensor pattern
-
To stimulate and verify sensor pattern
-
To generate and compile sensor design reports
Job Requirements:
-
Ph.D/ M.Ph/ M.Sc/ B.Sc in Electronics Engineering / Physics / Material Engineering
-
2 years of experiences in the following related fileds: touch sensor design and stack up, analog design, IC design
-
Knowledge in C / C++, Assembly, MATLAB or equivalent
-
Understand touchsensor stack up and technology
-
Candidates with substantial working experiences, including university research experiences, will be considered as Senior Engineer
|
|
8. |
Post Date: 30.Dec.2013
System Design Engineer (Ref: BO/SYDE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
To perform IC system design and compile system specification
-
To prepare FPGA prototype setup
-
To conduct system validation
-
To conduct silicon evaluation
-
To invent and develop cutting-edge touch technology
-
To debug and investigate during product development cycle
-
To prepare and generate system architecture reports
Job Requirements:
-
Ph.D/ M.Ph/ M.Sc/ B.Sc in Electronics Engineering equivalent
-
3 years of experience in IC design
-
3 years of experience in one or more of the following areas: touch controller IC, LCD display systems, mobile phone systems
-
Familiar with SoC design, Verilog HDL, C / C++, Assembly, FPGA prototyping, DSP, RTL, DAC and ADC
-
Experiences and knowledge in touch technology development is a plus
-
Candidates with substantial working experiences, including university research experiences, will be considered as Senior Engineer
|
|
9. |
Post Date: 30.Jan.2014
Senior Analog Design Engineer/ Manager (Ref: Design/SADE/CO/HK)
Location: Hong Kong
Job Responsibilities:
-
Perform analog and mixed-signal circuit design and system integration in Power Electronics IC
-
Supervise physical layout and perform design verification
-
Participate in design review and engage in design flow/ methodology improvement
-
Compile design documentation and test report
Job Requirements:
-
M.Ph/ M.Sc./B.Sc in Electronics Engineering or equivalent
-
At least 5 years design experience and knowledge in power supply IC
-
Experience in one or more of the following areas will be an advantage: (1) scripting languages such as Perl, Tcl and Make. (2) System Verilog & UVM. (3) Mixed signal SoC. (4) AMS or VerilogA verification
|